Road Stud
| Model No. | CTO28449 |
|---|---|
| Sample Time | 7 days |
| OEM / ODM | Available |
| Port | Shenzhen or HK,China |
| Views | 26 views |
US$ 3~11 /Piece | Get Latest Price
Product Detailed Description
- Product Description
- Solar Plastic Road Stud (Battery)_
- Arc shape, more solid body, different LED Color
- Size: DIA50*32 (25.5+6.5)mm
- Color: White, Yellow, Green, Red, Blue
- Weight: 69g
- packaging: In carton. 1pcs/carton, Carton size: 5.5*5.5*3.5cm, 280000pcs/20FT container
- MOQ: 100pcs
Key features:
Only 6.5mm up-ground surface make it could stand snow plough
Round design creates good appearance while relieving the impaction from traffic load so as to be durable
Shell adopts one-off molding, greatly improving its Compression resistance. Solar panel, electronics and optics are fitted inside Material of shell, dustproof and unbreakable up to International Standard IP68.
Technical features:
Item Description
Solar cell Type Mono crystalline
Voltage 2V
Current 50A
Battery Type Heat-resistance Ni-MH
Voltage 1.2V
Capacity 300MAH(Flash) 800Mah(steady)
Circle life 1000 circle(over 3 year)
Work temperature -20C - +70C
LED frequency 4Hz or steady
Size Φ5mm
Number 1pcs
Color White, yellow, red, blue, green
Flash way Blink or steady
Luminous intensity 8000-10000mcd
Control circuits IC
Operating time Standard charged in the sun for 8 hours available for 72 hours blinking lighting and 32 hours constant lighting
Starting intensity 500 LUX
Life in use 3 year
Warrant 1year
Material of body shell: PC
Material of body inside Epoxy glue
Water proof IP68
View distance: Over 300m
Installation Procedure:
- 1. Check if the solar stud charge and discharge in normal way;
- 2. Identify the place and distance for installation and clean road surface;
- 3. Clean the bottom of the solar stud and stick it onto the road surface;
- 4. Steady it with two screws if road condition is bad such as sandy road.
- 5. Dont put them into use till 4 hours later when they are completely dry.
1 Capacitor solar road stud 2 Anti-heat battery solar road stud 3 Anti-abrasion lens road stud 4 Glass-face reflector road stud 5 Epoxy filled in road stud 6 Fiberglass road stud 7 Permanent road stud 8 Wireless power road stud 9 Temporary road stud 10 ASTM4280 road stud 11 BS873 road stud 12 EN-1463 road stud 13 Metal road stud 14 Aluminum road stud 14 Reflective road stud 15 Solar road stud manufacturer 16 Road stud manufacturer 17 Cats eye manufacturer 18 Road stud supplier 19 Solar power LED road stud 20 LED road stud 21 Raised pavement marker 22 Reflective stud 23 Solar stud 24 Road reflectors 25 Reflector in road 26 Reflectors on road 27 Solar road reflector 28 Cats eye road reflector 29 Reflectors in the middle of the road 30 Road marker 31 Pavement marker 32 Road reflector 33 Reflective pavement marker 34 Solar road marker 35 Cats eye 36 Intelligent road studs 37 Active road stud 38 Swareflex 39 Wired road stud 40 Smart road stud
About this range
Made to your specification: this range mixes items from several product families, so material, finish and construction are confirmed on the quotation and on the pre-production sample before bulk starts, and the unit that ships matches the unit that was approved. Every item is inspected before packing, and repeat orders keep the same specification. Dimensions, colours, printing method and packaging are quoted per item; other options are quoted on request.
Who it suits
Built for buyers who source across categories and want one quotation and one shipping date. Typical uses include:
- Promotional and corporate-gift programmes mixing several product lines in one shipment
- Retail and e-commerce sellers restocking a catalogue rather than a single item
- Trade-show and event orders that need matching items across categories
- Distributors consolidating small orders from several suppliers into one delivery
- Buyers who want the specification confirmed on a sample before bulk
Ordering & commercial terms
| MOQ | Negotiable — confirmed on the quotation per item |
| Samples | Available before bulk; sample fee quoted per design and credited against the bulk order |
| Lead time | Confirmed on the quotation per item |
| OEM / ODM | Logo printing, custom packaging and private-label builds available |
| Artwork | Your artwork is checked by our team before production starts |
| Packaging | Quoted per item — poly bag, gift box, blister or custom box |
Terms above apply across the range; item-specific specifications are quoted with the product.
Customisation
- Logo printing, engraving or embroidery on the item or on the packaging
- Custom packaging: poly bag, gift box, blister card or printed carton
- Private-label builds under your own brand
- Artwork checked by our team before production starts
- Colour and finish matched to your reference sample