A. Deutsch
1.Beschreibung:
l Höchste Qualitätsstandards ,Wasserdicht
l Bessere Wahrnehmung der Fahrbahn
l Höhere Lebensdauer,mehr als 3.200 Stunden
l Höhere Lichtbreite und Reichweite
l Vermeidung von Augenmüdigkeit
l Niedriger Energieverbrauch ,30 % weniger Stromverbrauch
2.Technische Daten:
l Eingangsspannungsbereich 9 - 16 V
l Arbeitstemperatur: - 40℃ bis +105℃
l Nominelle Abgabeleistung 35 W
l CE und E-Norm geprüft
l I norm: 3,2 Ampere(max 6A)
l V norm: 13,2 V
l Fassung der Birnen:H11
l Lichtfarbe:6000K
l Eingangsspannungsbereich: 12V, 35W-9V-16V; 12V, 55W-9V-32V
3.Hinweise:
Decodierung der digitalen intelligenten Schutz-Funktion:
l Low Voltage Protection. Das Vorschaltgerät schaltet sich Automatisch aus,
wenn die Spannung niedriger als 9V DC ist.Wenn die Spannung wieder normal ist,
könnte es gut funktionieren.
l High Voltage Protection.Das Vorschaltgerät schaltet sich automatisch aus,
wenn die Spannung höher als 16 DC oder 12DC ist.Wenn die Spannung wieder
normal ist, könnte es gut funktionieren.
l Non-Überlastschutz.Das Vorschaltgerät schaltet sich automatisch aus,
wenn die Glühbirne nicht angeschlossen ist oder inkorrekt angeschlossen ist.
Es waere gut zu funktionieren, nachdem die Glühbirne gut angeschlossen ist.
l Kurzschlussschutz.Das Vorschaltgerät schaltet sich automatisch aus,
wenn es einen Kurzschluss gibt.Es wäre gut zu funktionieren, nachdem es gut verbunden ist.
l Reverse Schutz.Das Vorschaltgerät schaltet sich automatisch aus,
wenn die Elektrode des Eingangssignals umgekehrt verbunden war. Es wäre gut
zu funktionieren, nachdem es gut verbunden ist.
4.Lieferumfang:
l 2 x Xenon-Brenner
l 2 xTOP Steuergeräte (digital)
l 1 x Kabelsatz
l 1 x Kleinmaterial
B. English
Description:
NOTICES:
(1) Low voltage protection. The ballast will turn off automatically when the voltage is lower than9v
DC. When the voltage is back to normal it could work well.
(2) High voltage protection. The ballast will turn off automatically when the voltage is higher than16
DC or 12DC. When the voltage is back to normal it could work well.
(3) Non-load protection. The ballast will turn off automatically when bulb is not connected or
connected incorrect. It would work well after the bulb is connected well.
(4) Short circuit protection. The ballast will turn off automatically when there is a short circuit. It
would work well after it is connected well.
(5) Reverse protection. The ballast will turn off automatically when the electrode of the input was
reversed connected. It would work well after the it is connected well
Please test our products on the battery that is outside of the car. If the bulb is light and you’re satisfied with it, you could install it on your car.
Xenon bulb is a light source and a replacement. So the effect can’t be compared with the original. The modified effect of each car is different that dePends on the battery, Line, Lamp holder, etc
If you have any dissatisfaction, please contact us immediately.