![]() |
China Leather Band Sector LED Watch Manufacturer,Promotional Custom Imprinted Leather Band Sector LED Watch,Advertising Leather Band Sector LED Watch,discount Leather Band Sector LED Watch supplies |
100% Brand New Leather Band LED Watch:
* Case Material: Stainless-Steel
* Case Diameter: 1.34 inch
*Case Thickness: 0.39 inch
*Band Length: 6.93 inch
*Band Width: 0.71 inch
*Silver stainless steel case & Leather band.
*Square black dail,different from general round case.
*LED display time and date.
* Quartz movement.
* Press the frist button at the side, the LED's show the current time. Press the button again will display the date.
*Time mode: The 12 LED's in the top arch show the current hour and the minutes, which can be computed from the
two LED rows below. The 5 LED's in the middle display the time exactly to 10 minutes and the lower LED's show the
time exactly to one minute. Adding these two results to the exact time exactly to one minute.
* Date mode: The 12 top LED's display the current month and the two LED rows beneath show the day in the month.
The 3 bottom LED's will always display the current mode (Date, AM, PM).
*There are two buttons on the side of the watch,use a Sharp item push the second smaller button twice(when the LEDs didn't lighted),when the Leds Flashing,you could adjust the hours,then push the first button once again,the 5LEDs flashing,you could adjust the minute to the 10 minutes.After that press the first button the third time,the 9LEDs flashing,you could adjust the minute.So does the date adjustment.
*LED color: Blue/Blue+red.
Note:Please notify the led color you need before placing the order.It is very important!!!Thanks.