Electromagnetic Radiation Tester Electr Eradiate Tester Digital Large Display Radiation Detector
1) The display panel 2) Power switch
3) Instrument frame 4) Battery cover
Features
1, simple, rapid measurement of the electrical appliances, wires and industrial equipment around the intensity of electromagnetic radiation.
2, value for money, easy to carry.
3, the test frequency band width.
4, the value of contrast and clear, suitable for measuring effects of radiation products, presentations, and personal understanding of radiation.
5, designed to meet CE.
Application
1, for the environmental electromagnetic radiation testing: bedroom, office, computer room, control room, cable, power lines, Monitors and other radiation measurements.
2, used in electrical equipment, electromagnetic radiation measurement: phones, computers, televisions, copiers, fax machines, air conditioners, refrigerators and other radiation sources tested.
Technical Specifications:
Size: 132mm (length) × 69mm (width) × 29mm (H)
Weight: 190 g
Readings: three semi-LCD display, maximum reading 1999.
Parsing degree: 1μW/cm2
Test Bandwidth: 50Hz-2000MHz
Sampling time: about 0.4 seconds
Overload Tip: LCD display "1"
Operating voltage: 9V
Battery: 6F22 9V
Accessories: manual, warranty card, a 9V battery
measurement procedure
1, press the power switch, aligned under test for measurement of electrical appliances.
2, hand-held instrument slowly approaching the object under test, until in contact with, the more electromagnetic radiation near the larger the value of the object under test. Note: The distance measured object can be high.
3, the process of trying to change the instrument measuring the angle has been measured to achieve the best results.
4, if the process of measuring the power off of the measured object, the instrument reading of zero should be restored, unless there are other interference.
on the battery
1, when the instrument is smaller test data or not Alarm, said the charge is low, please change the batteries.
2, the instrument should be stored when not remove the battery.