Intelligent Radiation Detector w/ built-in alarm for home/personal use - Prevent Nuclear Pollution

Intelligent Radiation Detector w/ built-in Alarm for home/personal use – Prevent Nuclear Pollution

Description:
This detector aims to measure χ and γ radiation for home and personnel use. It can test radiation dose and accumulated dose simultaneously and make a measurement every 4 minutes. The maximum continuous recording time is 640 minutes. You can set the radiation dose and accumulated dose limit by the two buttons on the detector. Once the measurement is over the limit or blocked, the alarm system will be Automatically turned on.

This detector can transfer data to data bank for retrieval and analysis data by means of an infrared reader and a computer. The software included will provide different calculation, statistical analysis and graphs according to your different requirments.

This device is only for home and personnel use. It is not suitable for detecting Nuclear Pollution for public. For more professional device, please see our other radiation detectors.

Highlights:
Miniature tube detector
LCD display
Infrared data transmission
Audible alarm available
High sensitivity
Support setting up alarm limit

Manufacturer specifications:
Detection of χ and γ radiation
Energy range: 50keV ~ 1.5MeV
Dose rate measurement range:  0.1μSv/h～500mSv/h
Accumulated dose measurement range: 0～9999mSv
Allowable measurement error: ≤±10% ( 137Cs , 662keV, 1mSv/h )
Operation temperature: －10℃～＋50℃  (10％～95％，relative humidity)
Battery life: ＞700h
Size: 47×69×17.5 mm

Package list:
1x Personal Intelligent Radiation Detector w/ built-in alarm – Prevent Nuclear Pollution
1x User Manual