Weak Acid Soldering Solder Paste Flux Grease Paste New

Detailed Product Description
Features:
Solder flux paste
Used to connect the leads of integrate chip packages to attachment points (lands) in the circuit patterns on a printed circuit board
Joint high intensity
Good immersion
Good insulation
Color: As pictures show
Box Size: 46 x 12mm (Diameter x T)

HOW TO USE:
1. Using the end of a match or toothpick, apply a little soldering paste to the leads that will be soldered.
2. Place the soldering iron tip over the leads. Contact the solder against these leads. Heat the solder till it flows freely, then quickly move the soldering iron and solder away.