Classic Urn Pond Fountain

The Classic Urn Fountain is an elegant accent to any pond or pool setting.  This 'pond spitter' is made of real brass, and will last so long it'll become an heirloom.  Whether it's used as statuary or as a fountain, this accent will bring a classic touch to your outdoor space.

Three elements are required for installation for use as a fountain, or 'spitter':

This fountain sculpture is plumbed with copper tubing with a hose barb welded to the tubing at the bottom of the sculpture.

The receptacle to hold water (not included) can be any non-porous material large enough to receive the water emitting from the fountain sculpture.

A submersible, recirculating pump (sold separately) draws the water from the pump submerged in the receptacle through a plastic hose attached to the hose barb on the fountain sculpture.  The water runs through the copper tubing inside the sculpture and flows back into the receptable, thus providing a continuous flow of recirculating water.  The pump's electrical cord is plugged into a grounded 3-prong outlet.

Specifications