- Changing servo location to CCPM version, new aluminum parts for prompt, precision actions.
- The fiberglass battery mounting plate connects to main frame. It makes the center of gravity closed to rotor blade, reduced the correction when the heli rotation rolling.
- Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
- New streamlined carbon tail rotor blades makes the gyro more efficient.
- New tail rotor control set, CNC control piece and movable ball link for smooth pitch travel.
- Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don it need to add the weight, but you can see the flexibility of 3D actions.
- CNC Metal tail unit and tail holder are using high rigid aluminum, falling resistance.- New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safty.
- Use Aluminum alloy drive pulley and tail drive pulley, high regid and wear resistance. It is efficient to reduce the rotation loss and makes more smooth.
- All kit use stainless steel linkage ball, wear resistance, anti-oxidization.
- Tail rotor hub made of stainless steel, very strong.
- Great stable and sensitive mixing lever design! Can disply the great stability and precision for 3D flight.
- Special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter!
Specification:
- Length:650mm(25.6 in)
- Height:230mm(9.1 in)
- Main Blade Length:325mm
- Main Rotor Diameter:700mm(27.6 in)
- Tail Rotor Diameter:150mm(5.9 in)
- Motor Pinion Gear:12T/13T
- Main Drive Gear:150T
- Autorotation Tail Drive Gear:106T
- Tail Drive Gear:25T
- Drive Gear Ratio:1:12.5:4.24/1:11.5:4.24
- Weight:440g
- Flying Weight:Approx 730g
- Colour carton:68cm*17.5cm*21cm/1set
- Outer carton: 43.5cm*68.5cm*18.5cm 2sets/ctn,7.0kg/ctn
Features:
- CNC high strength carbon fiber main frames
- 30 Precision Bearings
- Auto-Rotation System
- Rear Tail Servo Mount
- Collective Pitch System
- Tail Rotor Drive Belt System
- Three point main shaft bearing support sets
RTF accessories included :
1) 450SE CF set*1 set
2) 325 CF rotor blade*1 set
3) Canopy*1 blue
4) RC:2.4GHz 6ch USB Programmable RC System or 35Mhz/72Mhz 6ch RC System
5) Gyro: 1
6) Servo:3
7) Rud servo:1
8) Brushless motor:3600KV*1
9) Battery:11.1v 2200mAh 15C*1
11) Charger:Belence charger*1
12) Adaptor:*1
13) ESC: M-30A*1
14) Colour box:68cm*17.5cm*21cm/1set,3kg/1set
15) Outer carton:43.5cm*68.5cm*18.5cm/ctn, 2sets/ctn,7.0kg/ctn