Diving Flashlight Hoozhu Hu33 LED Headlamp 4000 Lumens CE Rhos

Product Details

Basic Info.

Type:Diving Light

Material:Aluminum

Usage:Diving

Size:M

Gender:Both Man and Women

Color:Black+Blue

Certification:CE

Customized:Customized

Condition:New

Model/Name:Dive Torch for Diving

Burn Time:High: 1.5 Hrs, Low: 5.0 Hrs

Lens:6mm Clear PC

Modes:High, Low, Strobe

Treatment:Hard-Anodizing Type III

Battery:2X 32650 Li-ion Battery

Lumens:Max 4000 Lm

Weight:976 Gram (W/O Battery)

Export Markets:North America, South America, Eastern Europe, Southeast Asia, Oceania, Mid East, Eastern Asia, Western Europe

Additional Info.

Packing:EVA Gift Box

Standard:CE, RoHS, FCC, SGS

Origin:Shenzhen of China

HS Code:8513101000

Production Capacity:20, 000 Per Month

Product Description

 HOOZHU HU33 Canister Diving Light Waterproof 120m

Product Description

1. Model: HU33          
2. Name: Canister Dive Light (Canister Dive Torch )
3. LED:CREE XM-L 2 (White light)
4. Brightness: Max 4000 Lumens
5.Led color temperature: 6500.
6. Modes:High, Low, Strobe
7.Burn time:1.5 hrs (high), 5.0 hrs (Low)
8. Waterproof:100 meters
9. Material:Aeronautical aluminum
10. Color:Black/Blue
11. Treatment :Hard-anodizing type III
12. Lens: 6mm clear PC
13. Battry:2X 32650 Li-ion battery
14. Sizes: 43(body dia. ), 65(head dia. )mm, 1630mm(L)
15. Weight: 976g (w/o battery), 1253G(w/batteries)
16. Switch:Middle - Press On/Off to cycle through high, low, strobe, the lights will turn off after press and hold the switch for 2 seconds.

NOTES:
1. The Diving Light with special fixture.It would be damaged if disassembled at your own discretion.
2. Pl inspect the O-rings carefully every time you finished diving and change the broken O-rings when necessary.
3. After every diving,pl clean the flashlight body with fresh water,and store it properly after full dried.
 
BATTERY INSTALLATION
1. Remove the tail by turning counter-Clockwise.
2. Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
3. Mount the tail by turning clockwise.DO NOT ACTIVATE IT YET.
  
BATTERY CHARGING
1. Plug the Charger in the wall power socket, the indicator light is green in the free-load status.
2. Put the battery in the slot of the charger.
3. The indicator light is red if the batter is not fully charged; It will turn green after fully charged.
4.Take out the fully charged battery and use them in the diving light.
  
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
 
CAUTION
If the light is not to be used for sometime,remove the batteries to prevent possible leakage or corrosion.Pl remove the batteries during tranSportation to prevent it from incorrect operation
 
WARRANTY: One Year