2015 Hot Selling Max 4000 Lm Waterproof 120m Canister Diving Video LED Light

Product Details

Basic Info.

Usage:Diving

Power Supply:Rechargeable Battery

Switch:Soft-touch Switch

Charging type:Rechargeable

Runtime:5H

With Light Source:With Light Source

Battery Type:Lithium Battery

IP Rating:Waterproof 120m

Material of Reflecting Cup:Aluminum

Surface Preparation of Reflecting cup:Smooth

Material:Aluminum Alloy

Certification:CE, RoHS, FCC, SGS

Model/Name:Canister Diving Light

Burn Time:High: 1.5 Hrs, Low: 5.0 Hrs

Lens:6mm Clear PC

Modes:High, Low, Strobe

Treatment:Hard-Anodizing Type III

Battery:2X 32650 Li-ion Battery

Lumens:Max 4000 Lm

Weight:800 Gram (W/O Battery)

Export Markets:North America, South America, Eastern Europe, Southeast Asia, Oceania, Mid East, Eastern Asia, Western Europe

Additional Info.

Packing:Aluminum Gift Box

Standard:CE, RoHS, FCC, SGS

Origin:Shenzhen of China

HS Code:8513101000

Production Capacity:10, 000 Per Month

Product Description

HOOZHU Max 4000 Lumens Diving Video Light

Item No.: HV33
Name: Canister Diving Video Lamp (Max 4000 lm LED light for Diving Viedo)
LED: 4x CREE XML L2 LED(Max 4000 lm), 2x CREE XP-E-N3 Purple light(Wavelength: 395-400nm), 2x Green Light LED(Watelength: 520-525nm),2x Red Light LED.
Four colors of light: White:4000 lm,Red:200 lm,Green:200 lm,,Purple: 6W
Switch 1: White: High,Low,Strobe,Close.
Switch 2: White,Red,Green,Purple,Close
Color Temperature: White(4500-5000K),
Beam Angle: 140 degrees
Burn Time: 2.0 hrs (H), 7.0 hrs(Mid), Strobe 7.0 hrs(Low)
Waterproof: 120 meters
Material: Aeronautical aluminum
Color: Black/Blue
Treatment: Hard-anodizing type III
Lens: 6mm clear PC
Battery: 26650 Li-ion Battery*2.
Sizes: 43mm(body dia.), 60(head dia.)mm,1630mm(L)
Voltage: 5.6V to 8.4V
Weight:1180g (w/batteries),

NOTES:
1.The HV33 Canister Diving Video Light with special fixture.It would be damaged if disassembled at your own discretion.
2.Pl inspect the O-rings carefully every time you finished diving and change the broken O-rings when necessary.
3.After every diving,pl clean the flashlight body with fresh water,and store it properly after full dried.
 
BATTERY INSTALLATION
1.Remove the tail by turning counter-Clockwise.
2.Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
3.Mount the tail by turning clockwise.DO NOT ACTIVATE IT YET.
 
BATTERY CHARGING
1. Plug the Charger in the wall power socket, the indicator light is green
   in the free-load status.
2. Put the battery in the slot of the charger.
3. The indicator light is red if the batter is not fully charged; It will turn green after fully charged.
4.Take out the fully charged battery and use them in the diving light.
  
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
 
CAUTION
If the light is not to be used for sometime,remove the batteries to prevent possible leakage or corrosion.Pl remove the batteries during tranSportation to prevent it from incorrect operation
 
WARRANTY: One Year