Archon 4000 Lumens CREE Xm-L U2 Diving Equipment Waterproof 100 Meters Wh46

Product Details

Basic Info.

Waterproof Standard:IP68

Emitting Color:White

Application:Underwater 100 Meters Diving flashlight

Certification:CE

Model Item:Wh46 Diving Flashlight

Bulb:CREE Xm-L U2 LED*4 (Max 4000 Lumens)

Color Temperature:6500 K

Output Level:High> Low>Strobe

Runtiem:High: 5.0h, Low: 15.0h, Strobe: 8.0h

Light Head:with Handheld Bracket

Reflector:Glossy Aluminum Reflector

Angle of Light Beam:8¡ã Hot Spot, 110¡ã Periphery

Operation Voltage:12V to 18V

Weight:2420 Grams (with Battery Pack)

Export Markets:Global

Additional Info.

Packing:EVA Gift Packing.

Standard:CE, RoHS

Origin:Shenzhen of China

HS Code:85131010

Production Capacity:500, 000

Product Description

 Archon 4000 Lumens CREE XM-L U2 Diving Equipment Waterproof 100 meters WH46

PRODUCT SPECIFICATIONS:
1. Model: WH46 Canister Diving Light
2. Bulb: CREE XM-L U2 LED*4 (Max 4000 Lumens)
3. Color temperature: 6500k.
4. Three output levels. High> Low>Strobe
5. Runtime: High: 5.0h, Low: 15.0h, Strobe: 8.0h
6. Light head: With handheld bracket
7. Reflector: Glossy Aluminum reflector
8. Lens: 8mm Polycarbonate Board.
9. Body material: Durable aircraft-grade aluminum.
10. Angle of light beam 8¡ã Hot spot, 110¡ã Periphery
11. Surface treatment: Premium Type III hard-anodizing.
12. Color: Black
13. Battery: Rechargeable Li-ion battery pack (26650 battery *8)
14. Battery Indicator: 100%-50%: Green; 50%-30%: Yellow; 30%-10%:
Red; Below 10%: Red Flashing; Below 5%: Switch off;
15. Can be charged directly on the light, with battery over-discharging
Protection, polarity reversing protection
16. Fully charging time: 8-10h;
17. With gas release valve
18. Operation voltage: 12V to 18V;
19. Waterproof: 100 meters underwater
20. Dimensions: 244.5mm (canister length)* 78.2mm (dia. Of canister) *
64.5mm (dia. Of light head);
21. Weight: 2420 grams (with battery pack)
22. Underwater Weight: 1150 grams (with battery pack)
23. Impact resistance: 1.5M.

BATTERY CHARGING
1. Plug the Charger in the wall power socket, the indicator light is green
In the free-load status.
2. OPen the top cover of the canister, plug the plug of the charger in the
Ports on the canister. (the positive and negative polar doesn't matter,
Both ways work. )
3. The indicator light is on the charger red if the battery is not fully
Charged; It will turn green after fully charged.
4. Take out the charger, put the cover on the canister and use the light.

ON/OFF
Push the switch to turn it ON.

MODES CHANGING
Successive push the switch ON-OFF within two seconds to cycle through High, Low, strobe, OFF.

SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE