Product Details
Basic Info.
Type:Diving Light
Material:Aluminum
Usage:Diving
Size:M
Gender:Both Men and Women
Color:Black
Customized:Customized
Condition:New
Model/Name:U22 /Dive LED Torch Light
LED:CREE Xml U2*1 (Max 1000 Lumens)
Burn Time:High: 4 Hrs, Low: 7 Hrs, Strobe: 6 Hrs
Modes:High-Low-Strobe
Lens:6 Mm Clear PC
Treatment:Hard-Anodizing Type III
Battery:2X 26650 Li-ion Battery
Sizes:235(L)X60mm
Weight:243.2 Gram Without Battery
Export Markets:Global
Additional Info.
Packing:EVA Gift Box
Standard:CE, RoHS, FCC, SGS
Origin:Shenzhen of China
HS Code:8513101000
Production Capacity:20, 000 Per Month
Product Description
HOOZHU Max 1000 Lumens Diving LED Torch Light
SPECIFICATIONS:
1. Model: U22
2. LED: CREE XM-L 2
3. Brightness: 1000 Lumens
4. Modes: High, Low, Strobe
5. Burn Time: 4 hrs (High), 7.8 hrs (Low)
6. Waterproof: 100 meters
7. Structure Material: Aeronautical aluminu
8. Treatment: Hard-anodizing type III
9. Lens: 6mm clear PC
10. Beam Angle: 110 degrees
11. Battery: 2x 26650 Li- ion battery.
12. Sizes: 235(L)x32(body dia. )x60(head dia. )mm
13. Weight: 423.2 g (w/o battery)
14. ON/OFF: Tail switch
15. Operation: Repeated to switch ON/OFF within one second to cycle through 3 modes.
NOTES:
1. The Diving Light with special fixture.It would be damaged if disassembled at your own discretion.
2. Pl inspect the O-rings carefully every time you finished diving and change the broken O-rings when necessary.
3. After every diving,pl clean the flashlight body with fresh water,and store it properly after full dried.
BATTERY INSTALLATION
1. Remove the tail by turning counter-Clockwise.
2. Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
3. Mount the tail by turning clockwise.DO NOT ACTIVATE IT YET.
BATTERY CHARGING
1. Plug the Charger in the wall power socket, the indicator light is green in the free-load status.
2. Put the battery in the slot of the charger.
3. The indicator light is red if the batter is not fully charged; It will turn green after fully charged.
4.Take out the fully charged battery and use them in the diving light.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
If the light is not to be used for sometime,remove the batteries to prevent possible leakage or corrosion.Pl remove the batteries during tranSportation to prevent it from incorrect operation
WARRANTY: One Year