Product Details
Basic Info.
Type:Diving Light
Material:Aluminum
Usage:Diving
Size:M
Gender:Both Man and Women
Color:Black+Blue
Certification:CE, RoHS, FCC, SGS
Customized:Customized
Condition:New
Model/Name:Canister Dive Light
Burn Time:High: 1.5 Hrs, Low: 5.0 Hrs
Lens:6mm Clear PC
Modes:High, Low, Strobe
Treatment:Hard-Anodizing Type III
Battery:2X 32650 Li-ion Battery
Lumens:Max 4000 Lm
Weight:976 Gram (W/O Battery)
Export Markets:North America, South America, Eastern Europe, Southeast Asia, Oceania, Mid East, Eastern Asia, Western Europe
Additional Info.
Packing:EVA Gift Box
Standard:CE, RoHS, FCC, SGS
Origin:Shenzhen of China
HS Code:8513101000
Production Capacity:20, 000 Per Month
Product Description
HOOZHU Max 4000 Lumens Canister Diving Light
Model: HU33
Name: Canister Diving Light (LED flashlight for diving)
LED: CREE XM-L 2 (White light)
Brightness: Max 4000 Lumens
LED Color temperature: 6500.
Modes: High, Low, Strobe
Burn Time: 1.5 hrs (high), 5.0 hrs (Low)
Waterproof: 100 meters
Material: Aeronautical aluminum
Color: Black/Blue
Treatment: Hard-anodizing type III
Lens: 6mm clear PC
Battery: 2X 32650 Li-ion battery
Sizes: 43(body dia. ), 65(head dia. )mm, 1630mm(L)
Voltage: 5.6V to 8.4V
Weight: 976g (w/o battery), 1253G(w/batteries)
Switch: Middle - Press On/Off to cycle through high, low, strobe, the lights will turn off after press and hold the switch for 2 seconds.
NOTES:
1.The HU33 Canister Diving Light with special fixture.It would be damaged if disassembled at your own discret.
2.Pl inspect the O-rings carefully every time you finished diving and change the broken O-rings when necessary.
3.After every diving,pl clean the flashlight body with fresh water,and store it properly after full dried.
BATTERY INSTALLATION
1.Remove the tail by turning counter-Clockwise.
2.Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
3.Mount the tail by turning clockwise.DO NOT ACTIVATE IT YET.
BATTERY CHARGING
1. Plug the Charger in the wall power socket, the indicator light is green
in the free-load status.
2. Put the battery in the slot of the charger.
3. The indicator light is red if the batter is not fully charged; It will turn green after fully charged.
4.Take out the fully charged battery and use them in the diving light.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
If the light is not to be used for sometime,remove the batteries to prevent possible leakage or corrosion.Pl remove the batteries during tranSportation to prevent it from incorrect operation
WARRANTY: One Year