Stone Pond - Granite Finish

The Stone Pond is cast in 'mineralstone' and is natural-looking, durable, non-porous, and lightweight.  This pond was designed for use with any of our Pond & Pool Spitters, but can also be used alone.  Made of a durable 'mineralstone' material, which constists of various minerals and stone which are finely ground and blended with a special polyester resin to achieve a truly natural look and water integrity. 

• Use with the optional hollow pedestal, which conceals the submersible pump - just place it underneath, and feed the tubing up through the hole and into your fountain.
• Underneath is finished with a fiber-reinforced polyester laminate to ensure the pond's strength.
• The magic of splashing water is created when the stone ponds are stacked in various combinations.  Unlimited sizes and shapes can be formed.
• The manufacturer does not recommend putting fish in this pond, or standing or wading in this pond.

Our lightweight ponds can be stacked as high as you wish to create a waterfall effect. Water can flow from a large pond to a large pond; from a small pond to a small pond and from a small pond to a large pond. The first pond should be laid flat on the ground. The upper pond will need a 12" back support and should overlap the bottom pond sufficiently to allow adequate clearance for the cascade to clear the inside edge of the lower pond. Any additional ponds that you add to your waterfall will need supports in 12" increments. (Also shims may be required to stabilize/level pond).