China wholesale Sourcing
China trade>Electronics & Electrical>Solar Products>solar outdoor light>solar road light
Solar Road Stud from China
Solar Road Stud http://www.chinatraderonline.com/Solar/solar-road-light/Solar-Road-Stud-135159525.htm
Product Name: Solar Road Stud
Model No.:CTO28452
U.Price: Negotiable
Price Terms: FOB
Payment Terms:T/T
Delivery Lead Time: Negotiable
Product Origin: China
Solar Road Stud enquête
Detailed Product Description

Product Description
Solar Road Stud - Battery)
3 years life, 1 year warrantee

Size: 112*100*33mm
Weight: 0.53kgs
Package: 30pcs/carton, Carton size 38*27*28cm, 32600pcs/20FT
MOQ: 100pcs

Key features:
1. Perform well on pressure resistance for solid structure, filled with epoxy inside.
2. There is aluminum support between two LEDs so that LED part is not be broken by vehicles.
3. Two reinforced veins are designed on the top edges of it to not only strengthen compression resistance but also protect the solar panel against compression from traffic loads
4. Solar panel, electronics and optics are fitted inside waterproof and unbreakable
5. Two screw holes are designed on both sides so as to make it more stable into the ground.


Technical specification:
Item Description
Solar cell Type Mono crystalline
Voltage 4V
Current 65MA
Battery Type Heat-resistance Ni-MH
Voltage 2.4V
Capacity 600MAH(Flash) 800Mah(steady)
Circle life 1000 circle(over 3 year)
Working temperature -20C-+70C
LED frequency 4Hz or steady
Size Φ10mm
Number 2X2PCS
Color White, yellow, red, blue, green
Luminous intensity 8000-10000mcd
Control circuits IC
Operating time (single-side) charged in the sun for 8 hours available for 72 hours blinking lighting and 32 hours constant lighting
Compression resistance over 10 Ton
Starting intensity 500 LUX
Application situation Edge line
Life in use 3 year
Warrant 1 year
Material of body shell: Aluminum alloy
Material of solar panel shell: PC
Material of LED shell: PC
Material of body inside Epoxy glue
Water proof IP68
View distance: Over 500m

Installation Procedure:
1. Check if the solar stud charge and discharge in normal way;
2. Identify the place and distance for installation and clean road surface;
3. Clean the bottom of the solar stud and stick it onto the ground;
4. Steady it more with two screws if road condition is bad such as sandy ground.
5. Dont put solar studs into use till 4 hours later when they are totally dry.

You may also find us by the following key words:
1 Capacitor solar road stud 2 Anti-heat battery solar road stud 3 Anti-abrasion lens road stud 4 Glass-face reflector road stud 5 Epoxy filled in road stud 6 Fiberglass road stud 7 Permanent road stud 8 Wireless power road stud 9 Temporary road stud 10 ASTM4280 road stud 11 BS873 road stud 12 EN-1463 road stud 13 Metal road stud 14 Aluminum road stud 14 Reflective road stud 15 Solar road stud manufacturer 16 Road stud manufacturer 17 Cats eye manufacturer 18 Road stud supplier 19 Solar power LED road stud 20 LED road stud 21 Raised pavement marker 22 Reflective stud 23 Solar stud 24 Road reflectors 25 Reflector in road 26 Reflectors on road 27 Solar road reflector 28 Cats eye road reflector 29 Reflectors in the middle of the road 30 Road marker 31 Pavement marker 32 Road reflector 33 Reflective pavement marker 34 Solar road marker 35 Cats eye 36 Intelligent road studs 37 Active road stud 38 Swareflex 39 Wired road stud 40 Smart road stud

 

 

You may also be interested

  • Solar Signal Light
  • solar road stud
  • solar road stud
  • Solar Road Stud
  • solar traffic light
  • Solar Traffic Yellow Light
  • Solar Ground Light
  • China solar traffic lights

Send Enquiry

Your Email:
Message: